HP ProLiant ML370 - Page 44

Environmental
EnvironmentalEnvironmental
Environmental
Requirements
RequirementsRequirements
Requirements
System Inlet Temperature
System Inlet TemperatureSystem Inlet Temperature
System Inlet Temperature
Operating:
Operating:Operating:
Operating: 10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305m (1.8°F
per every 1000ft) above sea level to a maximum
of 3050m (10,000ft), no direct sustained
sunlight. Maximum rate of change is 10°C/Hr
(18°F/Hr ). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault or above 30°C (86°F).
Non-Operating:
Non-Operating:Non-Operating:
Non-Operating: -30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/Hr (36°F/Hr).
Humidity
HumidityHumidity
Humidity
Operating:
Operating:Operating:
Operating: 10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
Non-Operating:
Non-Operating:Non-Operating:
Non-Operating: 5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude
AltitudeAltitude
Altitude
Operating:
Operating:Operating:
Operating: 3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-Operating:
Non-Operating:Non-Operating:
Non-Operating: 9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Maximum Wet Bulb
Maximum Wet BulbMaximum Wet Bulb
Maximum Wet Bulb
Temperature
TemperatureTemperature
Temperature
101.7° F (38.7° C)
Shock
ShockShock
Shock
Listed are the levels of
shock the product can
withstand with NO
damage being incurred.
The values represent a
peak input acceleration
during an 11ms half-sine
shock pulse.
Operating:
Operating:Operating:
Operating: 2 G's
Non-Operating:
Non-Operating:Non-Operating:
Non-Operating: 15 G's
Vibration
VibrationVibration
Vibration
Listed are the levels of
vibration the product can
withstand with NO
damage being incurred.
The values represent a flat
random vibration input
acceleration profile across
the given frequency range.
Operating:
Operating:Operating:
Operating: Random vibration at 0.000075 G²/Hz, 10Hz to
300Hz, (0.15 G's nominal)
Non-Operating:
Non-Operating:Non-Operating:
Non-Operating: Random vibration at 0.0005 G²/Hz, 10Hz to
500Hz, (0.5 G's nominal)
QuickSpecs
HP ProLiant ML370 Generation 5 (G5)
HP ProLiant ML370 Generation 5 (G5)HP ProLiant ML370 Generation 5 (G5)
HP ProLiant ML370 Generation 5 (G5)
Technical Specifications
DA - 12478 Canada — Version 12 — April 13, 2007 Page 44