HP ProLiant Quick Restore DVD
Quick Restore Instructions
Third Edition (December 2004)
Part number: 372983-023
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company makes no warranty of any kind with
regard to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Confidential commercial computer software. Valid license required.
Printed in the USA.
hp ProLiant
Storage Server
Quick Restore DVD
Quick
Restore
Instructions
hp StorageWorks
Documentation CD
Quick Restore DVD
The Quick Restore DVD restores the storage server
device and configures the internal operating system drives
to factory defaults.
CAUTION: If the Quick Restore can not detect the
original Primary and Secondary OS logical drives,
Quick Restore will erase all data on the drives. Refer
to the HP ProLiant Administration Guide and the HP
ProLiant Installation Guide for information on
backing up data prior to performing a Quick
Restore procedure.
Requirements
The Quick Restore DVD requires that the console be directly
attached to a keyboard, monitor, and mouse.
Instructions
CAUTION: Once the restore has begun do not
interrupt the restore process.
1. Connect a keyboard, monitor, and mouse directly to the
storage server.
2. Insert the Quick Restore DVD.
3. Reboot.
4. Follow the on-screen directions.
When complete, the DVD will eject and the system will
automatically reboot.
NOTE: If your DVD-ROM drive has an automatic closing tray,
remove the DVD as soon as it is ejected. If the DVD is
not removed, the tray will close and the Quick Restore
program will launch when the system reboots. If that
happens, press E to cancel and remove the DVD.
Follow the procedures in the Installation Guide to
complete configuration.
372983- 023
To Next Page
Need help?
General