1
English
Getting Started
Attaching the Wrist Strap
Follow these instructions to attach the wrist strap to your camera to better
protect your new camera:
1. Insert the smaller loop of the strap in
the strap eyelet.
2. Thread the larger loop of the strap
though the short loop and pull tight to
attach the strap to the camera.
Inserting the Battery
Follow these instructions to insert the NP45 Lithium-ion (Li-ion) battery into
the battery compartment. If the battery is already installed, make sure to
power off the camera before removing and inserting a recharged or new
battery. Please read “Battery Information” before inserting/removing battery.
1. If the battery is already installed, make sure to power off the camera
before removing and inserting a recharged or new battery.
2. Open the battery compartment at the bottom of the camera.
To Next Page
Loading...
