HP Rp5700 - At A Glance

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 2 of 12
Group No: 579O
Section: -
Status: Draft
 PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1: HP RP5700
Name / Model #2
Name / Model #3
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HP products to remove components and materials requiring selective
treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column,
as applicable.
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
5 (system board; PSU
board; Power USB
board; Power COM
board; Riser card)
Batteries
All types including standard alkaline
and lithium coin or button style
batteries
1
Mercury-containing components
For example, mercury in lamps,
display backlights, scanner lamps,
switches, batteries
Liquid Crystal Displays (LCD) with a
surface greater than 100 sq cm
Includes background illuminated
displays with gas discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing
PCB/PCT)
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in
diameter or height
2
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardants
Components and parts containing toner
and ink, including liquids, semi-liquids
(gel/paste) and toner
Include the cartridges, print heads,
tubes, vent chambers, and service
stations.
Components and waste containing
asbestos
Components, parts and materials
containing refractory ceramic fibers
Components, parts and materials
containing radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where