Need help?Do you have a question about the HP RP5 Retail System and is the answer not in the manual?
Explains WARNING, CAUTION, and NOTE symbols used in the guide.
Describes general features of the computer model.
Details the components and indicators on the front of the computer.
Details the connectors and ports on the back of the computer.
Instructions for orienting the computer vertically.
Steps to install a rear port cover for cable management.
Specifies where to find the serial and product ID numbers.
Essential safety precautions before performing hardware upgrades.
Steps to remove and replace the computer access panel.
Steps to remove the front panel.
Instructions for installing an optical drive bezel.
Steps for removing bezel blanks and reinstalling the front bezel.
Information on installing additional memory, DIMM types, and specs.
Guidance on installing DIMMs in sockets.
Step-by-step instructions for installing RAM modules.
General guide for half-height expansion cards.
Specific instructions for a type of expansion card.
Instructions for adding a second DisplayPort.
Guide for installing full-height expansion cards.
Steps to install a serial port expansion card.
Procedures for replacing the riser card.
Details drive bays and general drive installation.
Steps to remove an optical drive from the 5.25-inch bay.
Steps to install an optical drive into the 5.25-inch bay.
Steps to remove a secondary HDD.
Steps to install a secondary HDD.
Steps for the primary HDD.
Instructions for replacing the system battery.
Procedures for installing various security locks.
Lists available integration system components.
Lists available peripheral devices.
Precautions to avoid damage from static electricity.
Various methods for grounding to prevent ESD.
Best practices for setup, operation, and maintenance.
Guidelines for operating and cleaning optical drives.
Steps to follow when preparing the computer for shipment.
To Next Page
General