HP Scanjet 5370C Series Hardware Installation

NOTE: Your scanner may have a template that holds more than one slide. If you
have a multiple-slide template, you may need to cover or mask slots that are not in
use. This will ensure the best possible image quality.
2.
Place the 35-mm slide in the cutout area in the middle of the small template.
Step 2: Position the slide
3.
Place the Active XPA over the template. Align it to fit in the corner cutouts on the
large template.
Step 3: Aligning the Active XPA
4.
Check the Use Transparency Adapter option in the HP scanning software.
NOTE: The Use Transparency Adapter option is under the Tools menu in HP
Precisionscan Pro.
5.
Scan as you normally would.
SUMMARY: HP supplies all of their manuals and help files with your HP Scanjet
scanner on the CD-ROM. To access the information you must install the scanning
software from the CD-ROM. Once that is completed you can follow the path below to
the User Guide and much more. Choose Start/Programs/HP Scanjet Software/HP
Online Help, then click any of the items listed:
 HP Scanjet Help
 HP Scanjet Readme

HP Scanjet 5370C Series Specifications

General

Brand	HP
Model	Scanjet 5370C Series
Category	Scanner Accessories
Language	English