HP Scanjet 5370c - Replacing the ADF Window

Replacing the ADF Window 3-4
....................................................................................................................................................................................................................................
Replacing the
ADF Window
If the ADF window becomes scratched or uncleanable,
you may need to replace it. Order the ADF window from
Hewlett-Packard (see “Ordering Parts and Supplies” on
page 3-7).
To remove the ADF window:
1
Remove the ADF from the scanner (see “Removing
the ADF” on page 3-6).
2
Lift the input tray of the ADF to expose the
ADF window.
3
Using a small coin, push each of the four Z-shaped
hooks until the tab snaps out of position. Push the
long, pointed tab on the end of the window.
The ADF window is
free to pull out:
Removing the ADF window
Pushing the Z-shaped hooks
Z-shaped
hook