HP Scanjet 7000 Getting Started Guide

1. Decide what software to install.
• If you will be using the scanner with document-management and scanning
software that you already own, you only need to install the HP Scanjet Drivers
and Tools.
• If you do not already have document-management and scanning software, you
can use the software that is shipped with the scanner. Read the onscreen
descriptions of the software during the installation to decide what software to
install. (The software and the number of CDs that are shipped with the scanner
might vary by country/region.)
2. Insert the HP Scanning Software CD into the computer CD drive. Wait for the
installation dialog box to appear.
3. Click Install Software, and then follow the instructions on the screen.
Set up the hardware
Complete the following tasks in order to set up the scanner hardware and prepare it for
use.
Install the feed roller
1. Open the scanner hatch and check to see if the feed roller is installed.
2. If the feed roller is not installed, remove the roller from its packaging and follow the
included instructions to install the roller.
Connect the power supply
The green LED on the power supply case is on when the power supply is functioning
correctly.
Set up the hardware 3
English

HP Scanjet 7000 Specifications

General

Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	15 - 80 %
Package weight	10200 g
Sustainability certificates	ENERGY STAR
Input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Display	LCD
Scanner type	Sheet-fed scanner
Product color	Black, Silver
Film scanning	-
Color scanning	Yes
Grayscale levels	256
Input color depth	48 bit
Maximum scan size	216 x 864 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	40 ppm
ADF scan speed (color, A4)	35 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	80 ipm
Duplex ADF scan speed (color, A4)	70 ipm
Safety	IEC 60950-1, CCC, GOST, BSMI, NOM
Minimum scan size	50.8 x 73.6mm
Image formats supported	BMP, JPG, PNG, TIF
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
Scanning media types supported	Card stock, Envelopes, Plain paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	49 - 120 g/m²
Scan to	E-mail
Sensor type	CCD
Scan drivers	ISIS, TWAIN, WIA
Scan file formats	BMP, DOC, HTM, JPG, OPF, PDF, PNG, RTF, TIFF, TXT, UNICODE, WPD, XLS, XPS
Daily duty cycle (max)	2000 pages
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Mac compatibility	No
Minimum processor	1.3 GHz
Minimum storage drive space	300 MB
Minimum system requirements	USB 1.1 CD-ROM 1024x768 SVGA
Compatible operating systems	Windows 7 Windows Vista Windows XP Professional (32/64-Bit) Windows XP Media Center Windows XP Home Windows 2000
Windows operating systems supported	Windows 2000, Windows XP Home, Windows XP Professional, Windows XP Professional x64
Electromagnetic compatibility	FCC, CISPR, ANSI, CAN/CSA–CISPR, EN, AS/NZS CISPR, CNS

Weight and Dimensions

Depth	280 mm
Width	320 mm
Height	246 mm
Weight	7280 g