5. Put the input tray on the ADF. Reload the unscanned pages in the ADF input tray.
6. Resume scanning.
Clear a jam at the end of the paper path
1. Remove any loose pages from the ADF input tray.
2. Gently pull the jammed page out of the ADF in the opposite direction from which the
page fed into the ADF.
3. If the jammed page still cannot be removed, lift the lid to its fully open position, loosen
the jammed page from the roller on the underside of the lid, and then gently pull the
page out of the ADF.
4. Close the ADF lid. Press down firmly on both sides until you hear a click.
5. Re-stack the unscanned pages and reload them into the ADF.
User Guide 59
To Next Page
Loading...