HP Scanjet 8300 - Scanner Error Messages; Troubleshooting Specific Errors

6. Resume scanning.
Remove a paper jam within the ADF
1. Remove any loose pages from the ADF input tray.
2. Open the scanner lid.
3. Locate the ADF access door on the underside of the ADF.
4. Press the tabs on the door, and then pull the door toward you until it detaches from
the ADF.
5. Remove any paper inside the ADF.
6. Replace the ADF access door by positioning the door over the ADF opening and
pressing the door into place until both sides click.
7. Close the scanner lid.
8. Reload the unscanned pages in the ADF input tray.
9. Resume scanning.
Chapter 10
60 HP Scanjet 8300 series