HP Scanjet Enterprise 7000 s2 User Manual

Sleep Mode
By default, the scanner will enter Sleep Mode after 15 minutes of inactivity, and will turn off
automatically after two hours of inactivity to conserve power. To change the default sleep and auto-off
settings, complete these steps:
1. Press the Tools (
) button to start the HP Scanner Tools Utility.
2. Click the Settings tab, and then select the appropriate sleep mode and auto-off settings.
●
To specify the period of inactivity after which the scanner goes into Sleep Mode, select 15
minutes or 1 hour from the Sleep: Put the scanner to sleep after: drop-down list.
●
To specify the period of inactivity after which the scanner automatically turns off, select the
appropriate value (1 hour, 2 hours, 4 hours, or Never) from the Auto-Off: Turn off the
scanner after: drop-down list.
Sleep Mode 11

HP Scanjet Enterprise 7000 s2 Specifications

General

Scanner Type	Sheetfed
Scan Speed (Color, 300 dpi)	40 ppm
ADF Capacity	50 sheets
Connectivity	USB 2.0
Levels of Grayscale	256
Scan Resolution	600 dpi
Scan Speed (Black & White, 300 dpi)	45 ppm
Daily Duty Cycle	3000 pages
Media Types	Paper, cards
Supported Operating Systems	Windows, Mac OS