Scan documents
The following topics describe how to scan originals using the scanner and the scanner software.
●
Tips on scanning
●
Scan from the control panel buttons
●
Scan from HP Smart Document Scan Software
●
Scan from ISIS- or TWAIN-compliant scanning software
Tips on scanning
●
If the scanner LCD does not display any scan profiles, open the HP Scanner Tools Utility to load
the profiles onto the scanner.
●
To reduce paper jams, use scan settings that specify the actual dimensions of the pages that
you are scanning.
●
To cancel a scan, press the Cancel (
) button.
●
If you press the Scan Duplex (
) button, the scanner processes both sides of the original
regardless of the scan profile setting. If you press the Scan Simplex (
) button, the scanner
processes the face down side of the original.
● You can create scan profiles that use non-HP scanning software. For more information, see the
HP Scanner Tools Utility Help.
Scan from the control panel buttons
To scan using the control panel buttons, follow these steps:
1. Load the originals.
2.
Use
and to select the scan profile you want.
TIP: Pressing OK displays the scan profile's file type, color mode, and resolution. To return to
the profiles list, press the Back (
) button.
3. Press either the Scan Simplex ( ) button for one-sided scans or the Scan Duplex ( ) button for
two-sided scans.
Scan from HP Smart Document Scan Software
You can start a scan from the HP Smart Document Scan Software.
1. Do one of the following:
●
Double-click the HP Smart Document Scan Software icon on the computer desktop.
●
Click Start, point to Programs or All Programs, point to HP, point to HP Smart Document
Scan Software 3.5, and then click HP Smart Document Scan Software 3.5.
Scan documents 19
To Next Page
Loading...