Automatically crop scanned image
To automatically crop a scan, follow these steps:
1. Open the HP Smart Document Scan Software.
2. Select a scan profile, and then click Edit profile.
3. Select your crop options
●
To automatically crop to the content of the document, click the Image Processing tab of
the Profile Edit dialog box, select the Crop to content on page check box, and then click
Crop settings.
●
To automatically crop to the dimensions of the document, click the Scan Settings tab of
the Profile Edit dialog box, click Page Size, and then select the Auto detect size check
box.
NOTE: Use the ISIS or TWAIN user interface to set crop options when scanning from non-HP
scanning software.
For information about the auto-crop settings, see the online help for the scanning software that
you are using.
Automatically crop scanned image 29
To Next Page
Loading...