HP Scanjet Enterprise 7500 - Scanning Documents; Scanning Tips and Button Operations

Scan documents
The following topics describe how to scan originals using the scanner and the scanner software.
●
Tips on scanning
●
Scan from the scanner buttons
●
Scan from HP Smart Document Scan Software
●
Scan from ISIS- or TWAIN-compliant scanning software
Tips on scanning
●
If the scanner LCD does not display any scan profiles, open the HP Scanner Tools Utility to load
the profiles onto the scanner.
●
To reduce paper jams, use scan settings that specify the actual dimensions of the pages that
you are scanning.
●
To cancel a scan, press the Cancel (
) button.
●
If you press Scan Duplex (
) and the selected profile is configured to use the automatic
document feeder (ADF), the scanner processes both sides of the original regardless of the scan
profile setting. If you press Scan Simplex (
), the scanner processes the face up side of the
original when scanning from the ADF or the face down side when scanning from the scanner
glass.
NOTE: If the selected scan profile is configured to use the scanner glass (rather than the
ADF), the scanner processes only one side of the original regardless of the scan button (
or )
you press.
●
You can create scan profiles that use third-party scanning software. For more information, see
the HP Scanner Tools Utility Help.
Scan from the scanner buttons
To scan using the scanner buttons, follow these steps:
1. Load the originals.
2. Use
and to select the scan profile you want.
TIP: Pressing OK displays the scan profile's file type, color mode, and resolution. To return to
the profiles list, press the Back (
) button.
3. Press either Scan Simplex ( ) for one-sided scans or Scan Duplex ( ) for two-sided scans.
Scan documents 11