Clear jams from the scanner paper path
To clear a paper jam:
1. Open the automatic document feeder (ADF) hatch.
2. Remove the originals or any obstructions from the paper path.
TIP: Use the green thumb wheel on the left side of the open hatch to manually advance
originals through the paper path.
3. Remove the ADF duplex background, remove any debris, and then slide the component back
into its housing until it clicks into place.
4. Close the ADF hatch until it snaps into place.
5. Reload the unscanned originals in the document feeder.
6. Resume scanning.
Scanner paper path problems 51
To Next Page
Loading...