6. Holding the roller assembly door down and out of the way, insert the new roller assembly into the
enclosure and slide it to the right until it is seated firmly.
7. Close the roller assembly door, ensuring that the latch seats firmly.
8. Close the ADF hatch, reconnect the power supply to the product, and then turn on the product.
9. Update the product maintenance history.
a. On the Home screen, touch the Device Maintenance button.
b. Touch the Replace Rollers button.
c. Scroll down through the online maintenance procedure and touch the Complete Maintenance
Procedure button.
d. Touch OK to record the maintenance activity and reset the counters to zero.
NOTE: HP recommends that you replace the rollers every 100,000 scans.
Replace the separation pad
The roller replacement kit includes a replacement separation pad. Always replace the separation pad
when you replace the rollers. To order the roller replacement kit, see
www.hp.com/buy/parts.
60 Chapter 8 Replace and install components
To Next Page
Loading...
