NOTE: You will periodically need to use a paper-path cleaning cloth for other care
and maintenance tasks. To order more paper-path cleaning cloths, go to
www.hp.com/support.
Test the installation
1. Place a single document page in the automatic document feeder (ADF).
2. Do one of the following:
• If the HP Smart Document Scan Software is installed, press the Scan Document
To (
) button.
If a scan does not appear on your computer screen, see “Uninstall and then
reinstall the HP Scanjet drivers and utilities” on page 19, and then try scanning
again.
• If the HP Smart Document Scan Software is not installed, scan from the software
program that you intend to use for scanning.
If the scan does not proceed as expected, see “Uninstall and then reinstall the
HP Scanjet drivers and utilities” on page 19, and then try scanning again. If
reinstalling the drivers and utilities does not work, consult the online help for the
scanning program for information on how to troubleshoot that program.
3. Install any additional software that you want to use.
Chapter 1
8 HP Scanjet N8400 series
To Next Page
Loading...
