1 Scanner set up
Follow these steps to set up the scanner:
1. Check the items shipped in the box.
2. Install the software.
3. Set up the hardware.
4. Test the installation.
Items shipped in the box
Unpack the scanner hardware. Be sure to remove any shipping tape.
1 HP Scanjet N8400 series scanner
2 Automatic document feeder (ADF) and ADF input tray
3 Power cable
4 USB cable
5 Scanning software CDs (For more information, see “Included software”
on page 3.)
6 Quick start button labels
7 Paper-path cleaning cloth
8 Setup and Support Guide (this book)
Install the software
CAUTION: Do not connect the USB cable to the computer yet. Install the scanning
software before connecting the USB cable.
2 HP Scanjet N8400 series
To Next Page
Loading...
