Battery
Description Spare part number
Battery, 4000-mAh, USB-charging, (includes cable and double-sided adhesive) 795066-001
Before removing the battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 18).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing
the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Use a case utility tool (2) or similar thin plastic tool to detach the battery (3) from the display panel
assembly. (The battery is attached to the display panel assembly with double-sided adhesive.)
Battery 21
To Next Page
Loading...
Need help?
General
