HP T200

20
3.12.1 Light
Three light settings are available.
• Light On: The light will be turned on and keep providing light.
• Digital Light: To extend the dynamic range for backlight and high contrast sense so that the
objects will be brighter and clearer.
• Light Off: The light is turned off.
Operation Display Screen
In the Effect submenu, touch the [ 1.
] icon on the
screen.
Touch to select the desired Light mode option..2.
Touch the Exit icon 3. (
) to exit.
3.12.2 Scene
You can select the mode according to the scene condition. The follow modes can be selected.
• Auto: Shoot without any special effect on the image. This is the default setting.
• Skin: Shoot with an effect that softens skin tones more natural.
• Night: Use Night Mode for night scenes or low light conditions.
• Backlight: You can take shots when bright light is behind the subject. This may help lighten
subject faces.
• Black/White: The image is converted to black-and-white.
• Classic: The image is converted to a sepia look.
• Negative: The image is converted as the negative of the normal.
Operation Display Screen
In the 1. Effect submenu, touch the [
] icon on the
screen.
Touch to select the desired scene mode option.2.
Touch the Exit icon 3. (
) to exit.
Note
Toavoidblurryphotos,placethecameraonaat,steadysurface,oruseatripodwhentaking
shots in the Night Mode.