BIOS setting Default value Other values
TPM Clear Do not reset Reset
Legacy Support Enable Disable (Note: The default value may be varied depends on the OS)
Secure Boot Disable Enable (Note: The default value may be varied depends on the OS)
Clear Secure Boot Keys Don’t Clear Clear
Key Ownership HP Keys Custom Keys
Fast Boot Disable Enable (Note: The default value may be varied depends on the OS)
Setup Browse Mode Enable Disable
Password Prompt on F9 & F12 Enable Disable
Runtime Power Management Enable Disable
Idle Power Savings Extended Normal
ACPI S3 PS2 Mouse Wake Up Enable Disable
S5 Maximum Power Savings Disable Enable
S5 Wake on LAN Disable Enable
POST Messages Disable Enable
Press the ESC key for Startup
Menu
Displayed Hidden
After Power Loss O On, Previous State
POST Delay (in seconds) None 5, 10, 15, 20, 60
Bypass F1 Prompt on
Conguration Changes
Disable Enable
Remote Wakeup Boot Source Local Hard Drive Remote Server
Power on Sunday – Saturday Disable Enable
Power on Time (hh:mm) 00:00 00:00:23:59
Serial Port A IO=3F8; IRQ=4 Disable, IO=3F8h; IRQ=3, IO=2F8h; IRQ=4, IO=2F8h; IRQ=3
Serial Port B IO=2F8h; IRQ=3 Disable, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h; IRQ=4
PCI SERR# Generation Enable Disable
PCI VGA Palette Snooping Disable Enable
Integrated Graphics Auto Disable, Force
UMA Frame Buer Size 512M 256M, 1G
Num Lock State at Power- On On O
Internal Speaker Enable Disable
Onboard NIC Option ROM
Download
PXE Disable
Changing BIOS Settings from the HP BIOS Congure Utility (HPBCU) 29
To Next Page
Loading...
Need help?
General
