10 Upgrading and Servicing Guide
Installing a memory module
Upgrade the memory in your HP TouchSmart PC with memory of the same type and speed as the memory
originally installed. The capacity for both memory modules must match for optimal performance. Both
memory modules can be installed by using the same procedure listed below.
1 Remove the memory module. See “Removing a memory module” on page 8.
2 Align the memory module with the socket, so that the key slot on the connector edge is same as the
module that you removed.
CAUTION: When handling a memory module, be careful not to touch any of the contacts.
Doing so may damage the module.
NOTE: The sockets are keyed. If the module slot does not match the socket, turn the memory
module over.
To Next Page
Loading...
