Component Description
(5) HP USB Digital/Analog TV Tuner Provides input and output jacks for the antenna or media cables.
The USB TV tuner has two LEDs that when lit indicate the following:
●
Blue – The tuner is connected to the computer.
●
Green – The tuner is receiving TV signals.
(6) Infrared (IR) emitter cable Connects the computer to your cable or satellite . When the cable
is connected, you can change channels on the receiver using the
HP Media Remote Control.
(7) HP Media Remote Control Used to change channels and to navigate.
NOTE: For more information on terms, refer to Appendix B, Glossary on page 36.
In addition to the items provided with the TV tuner, you may also need the following items (purchased
separately) for connections described in this guide:
●
Computer with a Windows Vista operating system and required computer equipment (such as an
AC adapter).
●
A working Internet connection (required for features such as scheduling recordings and accessing
the Program Guide).
●
A working TV signal source (either a digitally broadcast ATSC signal or a cable/satellite signal).
Your TV source may also require a cable or satellite receiver.
●
An RF coaxial cable (for a wall connection).
●
A television (optional).
●
An S-Video cable and audio-out Y cables or optional media cable (compatible with select models
only) if connecting a television.
●
Additional cables (composite video or S-Video) for some advanced connections or to facilitate your
cable length requirements.
Setup components 5
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
General