HP X111 100M SFP LC FX
HP X111 100M SFP LC FXHP X111 100M SFP LC FX
HP X111 100M SFP LC FX
Transceiver
TransceiverTransceiver
Transceiver
(J9054C)
HP X111 100M SFP LC FX
Transceiver: An SFP format
100-megabit transceiver
with LC connectors using
FX technology.
Ports
PortsPorts
Ports
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Environment
EnvironmentEnvironment
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cabling
CablingCabling
Cabling
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Notes
NotesNotes
Notes
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9054B 100-FX SFP-LC
Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X121 1G SFP LC SX
HP X121 1G SFP LC SXHP X121 1G SFP LC SX
HP X121 1G SFP LC SX
Transceiver
TransceiverTransceiver
Transceiver
(J4858C)
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.
Ports
PortsPorts
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
EnvironmentEnvironment
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Cabling
CablingCabling
Cabling
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,
low metal content, multimode fiber optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
QuickSpecs
HP 1810 Switch Series
HP 1810 Switch SeriesHP 1810 Switch Series
HP 1810 Switch Series
Accessory Product Details
DA - 13447 Worldwide — Version 9 — October 28, 2011
Page 23
To Next Page
Loading...
