HP X120 1G SFP RJ45 T
HP X120 1G SFP RJ45 THP X120 1G SFP RJ45 T
HP X120 1G SFP RJ45 T
Transceiver
TransceiverTransceiver
Transceiver
(JD089B)
Ports
PortsPorts
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
ConnectivityConnectivity
Connectivity
Connector type
Connector typeConnector type
Connector type
RJ-45
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
1.4 cm)
Full configuration weight
Full configuration weightFull configuration weight
Full configuration weight
0.07 lb. (0.03 kg)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
0.8 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
1.0 W
Cabling
CablingCabling
Cabling
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-
pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T
Maximum distance:
• 100m
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP 0.5 m Multimode
HP 0.5 m MultimodeHP 0.5 m Multimode
HP 0.5 m Multimode
OM3 LC/LC Optical
OM3 LC/LC OpticalOM3 LC/LC Optical
OM3 LC/LC Optical
Cable
CableCable
Cable
(AJ833A)
Cabling
CablingCabling
Cabling
Cable type
Cable typeCable type
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance
Maximum distanceMaximum distance
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Notes
NotesNotes
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
QuickSpecs
HP 1910 Switch Series
HP 1910 Switch SeriesHP 1910 Switch Series
HP 1910 Switch Series
Accessory Product Details
DA - 13677 North America — Version 6 — September 26, 2011
Page 19
To Next Page
Loading...
Need help?
General
