To Next Page

To Previous Page



17



HDMI connector P102

Repair the HDMI connector:

3) Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.

4) Use a hot air gun to melt the solder on the pins.

5) Lift the P102 connector from the PCB.

6) Place the new component on the PCB. Be sure that it matches the PCB footprint.

7) Solder the new component.

VGA connector P101

Repair the VGA connector:

8) Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.

Questions and Answers:

Need help?

Do you have a question about the HP V24 and is the answer not in the manual?

HP V24 Specifications

General