HP Vectra VL400 - Drivers; Software

60
5 Drivers and Software
Drivers
Drivers
You can download up-to-date versions of drivers required for VL400 PCs from
the “Software and Drivers” section of HP’s Support web site at
www.hp.com/go/vectrasupport.
Software
VL400 models come preloaded with the following software. You can download
the most up-to-date versions from the “Software and Drivers” section of HP’s
Support web site at www.hp.com/go/vectrasupport.
Operating Systems Either Windows 2000 (with Windows NT4 SP6 as alternative on CD-ROM), or
Windows95(withWindows98SEasalternativeonCD-ROM).
Software • e-DiagTools 3.0
•NTLock
•CD-R/WorDVDsoftware
• Soft Power Down (Windows NT4)
• TopTools
•SafeOff
• Anti-Virus software (on CD-ROM).
e-DiagTools HP e-DiagTools, the hardware diagnostics utility can help you diagnose
hardware-related problems on your HP PC. For more information about this
utility, refer to the e-Diagtools User's Guide.Thee-DiagtoolsUser'sGuide
is available on the HP Information CD-ROM for the VL400, or on HP’s
support web site (
www.hp.com/go/vectrasupport).
e-DiagTools is installed on the Utility Partition on the PC’s hard disk drive, is
provided on one of the CD-ROMS that came with the PC (HP Image Library
and Diagnostics System CD-ROM), and is available on the HP e-DiagTools
CD (you can order this CD-ROM from HP’s Support web site).