Problems
Frequently Asked Questions 9of11
Problems with storage devices:
I have a problem when I try to boot on my
ZIP device. What can I do?
!
Your Zip device must be installed on the secondary IDE channel
as ‘master’ and your CD driver as ‘slave’. In addition, in the BIOS
setup, it must be placed before the floppy drive in the boot order.
The ZIP device attached to the parallel
port of my PC doesn’t work under
Windows 98. What should I do?
!
This is due to an incompatibility problem between the IOMEGA
driver and a patch released by Microsoft for another problem.
If you experience this problem, you need to uninstall the Microsoft
patch by typing the following command at a DOS command
prompt:
Start -> Programs -> MS-Dos prompt
%windir%\rundll.exe %windir%\system\setupx.dll,InstallHinf
SectionDefaultInstall 132 %windir%\inf\qfe\win98.se\242939un.inf
To Next Page
Loading...
