HP W2338h User Manual

Operating the Digital Picture Frame Card Reader (Select Models)
User’s Guide 5–7
Changing the Slideshow Transition
1. Use the navigation buttons to select the Slideshow Transition setting. When it is selected, it is highlighted
in blue.
2. Press the Right Arrow button to scroll through the slideshow transition choices. The current choices are:
❏ Normal* (no transitional effect)
❏ Random (randomly uses all transitions below)
❏ Fade (new image supersedes old image)
❏ Curtain (new image moves from left to right on screen)
❏ Open Door
❏ Cross Comb (transition from both sides with horizontal lines)
3. Use the navigation buttons to select the slideshow transition you want, and then press the OK button.
4. Press the Left Arrow button or the Back button to get back to the Settings List.
5. Press the Menu button to return to the DPF menu.
Changing the Slideshow Speed
1. Use the navigation buttons to select the Slideshow Speed setting. When it is selected, it is highlighted in blue.
2. Press the Right Arrow button to scroll through the slideshow speed choices. The current choices are:
❏ 5 seconds*
❏ 10 seconds
❏ 30 seconds
❏ 60 seconds
❏ Manual control
3. Use the navigation buttons to select the slideshow speed you want, and then press the OK button.
4. Press the Left Arrow button or the Back button to get back to the Settings List.
5. Press the Menu button to return to the DPF menu.
Changing the Slideshow Shuffle
1. Use the navigation buttons to select the Slideshow Shuffle setting. When it is selected, it is highlighted
in blue.
2. Press the Right Arrow button to scroll through the slideshow shuffle choices. The current choices are:
❏ No Shuffle* (goes through pictures in the sequence they are stored on the media device)
❏ Shuffle Photos (pictures are shown randomly, no set order)
❏ Shuffle Music (music selections are played randomly, no set order)
❏ Shuffle Both (pictures and music are selected randomly, no set order)
3. Use the navigation buttons to select the slideshow shuffle option you want, and then press the OK button.
4. Press the Left Arrow button or the Back button to get back to the Settings List.
5. Press the Menu button to return to the DPF menu.

HP W2338h Specifications

General

Screen Size	23 inches
Resolution	1920 x 1080
Aspect Ratio	16:9
Brightness	300 cd/m²
Contrast Ratio	1000:1
Response Time	5 ms
Panel Type	TN
Input Connectors	VGA, HDMI
Viewing Angle	160° horizontal, 160° vertical
Power Consumption	45 Watts