9–GB Disk Drive
User Notes
Refer to your workstation owner’s guide or your disk drive installation
guide for detailed information about installing your disk drive. During
the installation procedure, you may have to change the SCSI ID of your
disk drive. Refer to the appropriate illustration to set the SCSI ID
jumpers to the desired SCSI ID.
NOTICE: We recommend that you use SCSI ID 6 for your
workstation’s first hard disk drive, and SCSI ID
5 for the second hard disk drive.
The 9–GB disk drive is fully operational with HP-UX Release 10.01 and
later on Series 700 binary–compatible systems.
The following patches are required to the operating system.
HP-UX
Version
Patches
– OS
Patches – Diags
10.01 PHKL_8904, PHKL_8329 PHSS_7583
10.10 PHKL_8906 PHSS_7585
10.20 PHKL_8908 PHSS_7929
After you have loaded HP-UX onto the drive, install the appropriate
patches using
swinstall and reboot the system.
Part Number A1658–90693
Edition E1
196
Printed in U.S.A.
To Next Page
Need help?
General