Setting Up and Using Your Linux Workstation
Setting Up Your Linux Workstation
Chapter 112
Setting Up Your Linux Workstation
WARNING If you have any doubt that you can lift the Workstation and
monitor safely, do not try to move them without help.
The following topics explain how to set up your x4000 Linux
Workstation. Some steps may not apply to your situation.
Prepare your Workspace
1. Unpack all of the components.
2. Place the monitor on a sturdy desk with easily accessible power
outlets and enough space for the keyboard, mouse, and any other
accessories.
3. Position the Workstation on a sturdy desk or the floor with the rear
connectors easily accessible. The Workstation must be close enough to
the peripherals so that the cables can be connected.
Installation Tools
No tools are required to set up your Workstation unless you are
installing a graphics card. If you are installing a graphics card, you need
a T-15 Torx driver and a flat-blade screwdriver.
To Next Page
Loading...
