HP xw4200 - Technical Specifications

Cooling
Chassis Fan 92 mm
Processor Heatsink Fan 70 mm
Power Supply Fan 92 mm
Power Supply Within 230V (115v/230V line switch)
Full Ranging Input (Line Select
Switch)
Yes
Active Power Factor
Correction (APFC) (Input
Current is nearly 1/2 a non-
APFC PS)
Yes
Passive Power Factor
Correction (PFC)
No
Operating Voltage Range 90 – 264 VAC/118 VAC
Rated Voltage Range 100 – 240 VAC
Rated Line Frequency 50-60 Hz/400Hz
Operating Line Frequency
Range
47 – 66 Hz/393 – 407Hz
Rated Input Current 6.4A/6.4A
Maximum Rated Power 400 W Peak/360 W Continuous
Heat Dissipation Typical 737.1 btu/hr
Maximum 1228.5 btu/hr
Power Supply Fan 92mm variable speed
PS Size 97.6 mm x 150 mm x 153.71 mm
Energy Star Compliant Yes
FEMP Standby Power
Compliant (<2W in S5 - Power
Off)
No
Power Consumption in ES
Mode - Suspend to RAM (S3)
(Instantly Available PC)
2.5 W
Surge Tolerant Full Ranging
Power Supply
Withstands power surges up to 2000V
Typical configuration power
consumption
1 processor (1x 3.4 GHz), 1 GB memory (2x512 MB)
Two hard drives (2xSATA 40 GB),
CD-ROM drive
PCI-Express Graphics Card (FX 1300)
Floppy, Monitor
Input Power consumption @ 120Vac/60Hz
Typical operating mode
(system busy)
216 W = 737.1 btu/hr
Windows XP Idle 138 W = 470.9 btu/hr
Standby mode (S3) 2.5 W = 8.53 btu/hr
Hibernate mode (S4) 2.1 W = 7.166 btu/hr
Power Off (S5) 2.1 W = 7.166 btu/hr
QuickSpecs
HP Workstation xw4200
Technical Specifications
DA - 12022 Worldwide — Version 6 — September 1, 2004 Page 17