2 Setting up the Hardware
This chapter provides information on setting up of the workstation hardware.
Quick setup
WARNING! To reduce the risk of electric shock or damage to your equipment:
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
NOTE: Your workstation might not have PS/2 mouse and keyboard connectors as shown in Figure
2–1. Alternatively, connect the mouse and keyboard to appropriate USB connectors (see Table 2–2).
Figure 2-1 Workstation quick setup example
NOTE: After setting up your workstation hardware, connect other peripheral components (such as a
printer) according to the instructions included with the device. For more information on your HP
Workstation, see the Documentation and Diagnostics CD or visit
http://www.hp.com/go/
workstationsupport.
ENWW Quick setup 7
To Next Page
Loading...
