HP Xw4550 - Workstation - 2 GB RAM Installation Guide

SATA optical drive installation
This document describes how to install a standard 5.25-inch, half-height Serial ATA (SATA) optical drive
in your HP workstation.
Kit contents
●
13.335 cm (5.25 inch), half-height SATA optical drive
●
SATA interface cables
●
Four M3 guide screws
●
Optional application software CD (based on optical drive)
●
Warranty information
Tools required
●
T-15 Torx screwdriver
●
Flat-blade screwdriver
Before you begin
To view QuickSpecs and determine the compatibility of this product with your HP workstation, see
http://www.hp.com/go/productbulletin.
© 2007–2009 Hewlett-Packard Development Company, L.P. Microsoft
Window XP and Windows Vista are U.S. registered trademarks of Microsoft
Corporation. Printed in the U.S.
ENWW Kit contents 1

HP Xw4550 - Workstation - 2 GB RAM Specifications

General

Form Factor	Tower
RAM	2 GB
Chipset	NVIDIA nForce Professional 3600
Optical Drive	DVD-ROM
Model	Xw4550
Processor	AMD Opteron
Hard Drive	SATA
Graphics	NVIDIA Quadro
Operating System	Windows XP Professional
Ports	USB 2.0, Serial, Parallel, PS/2, Audio
Expansion Slots	PCI Express x16, PCI Express x1, PCI