Introduction
The HP xw6200 Workstation offers flexible storage options and supports integrated SATA RAID and
optional SCSI RAID.
Key Product Features
Figure 1. HP xw6200 Workstation Components
Convertible to additional
1” HDD Bay
(2) Tool-less 1.0”
3.5” Drive Bays
The xw6200 supports (2) tool-less internal 1” HDD slots and (2) 5.25” tool-less optical bays. One of
the 5.25” bays can be converted to additional 1” internal HDD bay using the optional DY659A
bracket. The xw6200 can support up to 1.5TB of SATA storage (with the Adaptec 1420SA
controller), and up to 900 GB of SCSI storage.
The current HDD choices are shown below:
SATA 7200 SATA 10K SCSI 10K SCSI 15K
80 GB
(3Gb/s)
74 GB
(1.5Gb/s)
73 GB 36 GB)
160 GB
(3Gb/s NCQ)
146 GB 73 GB
250 GB
(3Gb/s)
300 GB
500 GB
(3Gb/s))
The xw6200 supports many combinations of SATA and SCSI drives for both factory integrated and
After Market Optional (AMO) storage. The supported choices are shown in the flowchart, starting
with the selection of SATA or SCSI for the first drive. The xw6200 has an integrated SATA controller,
but a SCSI controller must be added before any SCSI drives are added. Current choices are the
DZ539AV (factory integrated only, no external SCSI connector), DZ540AV SCSI RAID, DZ554A, and
2
To Next Page
Loading...
