HP XW8400 Guide

If you are adding a controller card to connect to a local storage, you must disable the onboard LSI SAS BIOS,
otherwise you will get "low memory resources" messages:
Reboot the workstation.
At the Blue HP computer start-up screen, press F10 to enter the computer BIOS configuration.
After selecting your language of choice, use the keyboard arrow keys (up, down, left and right) to select
(highlight) the following option: Advanced > Device Options > SAS Option ROM Download.
Press Enter.
Select Disable.
Press F10 (to accept).
Press F10 again.
Select Save Changes and Exit, and press Enter (the computer now restarts).
Nitris Testing Page 2

HP XW8400 Specifications

General

Processor Speed	Up to 3.0 GHz
Chipset	Intel 5000X
Power Supply	800W
Form Factor	Tower
Processor	Intel Xeon (Dual-core or Quad-core)
Memory	Up to 32 GB DDR2
Storage	SATA or SAS Hard Drives
Graphics	NVIDIA Quadro
Expansion Slots	2 PCI Express x16, 2 PCI
Operating System	Windows XP Professional
Optical Drive	DVD-ROM
USB Ports	7 USB 2.0
Network	Integrated Gigabit Ethernet