Cooling considerations
To ensure proper ventilation and cooling for your workstation, observe the following guidelines.
●
Keep your workstation in an area where the airflow is not obstructed.
●
Keep the workstation off from surfaces where dust can gather.
●
Remove dust on the front panel (vent area) and the rear fans with a small vacuum, compressed
air, or dust rag.
●
Keep the front and back of the workstation at least 0.15 m (6 in.) away from a wall or other
obstruction, as shown:
Figure 1 Maintain proper clearance
4 Power consumption and cooling ENWW
To Previous Page
Loading...
