Installing the system board
To install the system board:
1. Insert the system board straight down, ensuring that all system board standoffs engage with the
keyholes in the chassis.
Ensure the system board connectors engage correctly with the rear I/O panel.
2. Push back on the board while maintaining downward pressure on the board, so all standoffs remain
engaged.
3. Reinstall all removed components and cables. (Refer to
Power connections to system
components on page 71 to identify power cables.)
Product recycling
The Planet Partners recycling service provides an easy way to recycle computer equipment,
rechargeable batteries, or HP printing supplies. HP processes ensure that unwanted hardware or empty
HP printing supplies are recycled responsibly.
For information about recycling HP components or products, see
http://www.hp.com/go/recycle.
112 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
