HP Z220

Rated Line Frequency 50-60 Hz
Operating Line Frequency
Range
47-66 Hz
Rated Input Current 5.5A @ 100-240V
Heat Dissipation Typical: 910 btu/hr (229 kg-cal/hr)
Maximum: 1569 btu/hr (395 kg-cal/hr)
Power Supply Fan 92x25 mm variable speed
ENERGY STAR® qualified
(Config Dependent)
Yes
80 PLUS Compliant Yes, 90% Efficient
For the PSU Efficiency Report for the power supply, please go to this link:
http://www.plugloadsolutions.com/psu_reports/HEWLETT-PACKARD_619397-
001_ECOS%202277%201_400W_Report.pdf
CECP Compliant @ 220V
(<4W in S3 - Suspend to
RAM)
Yes, Configuration dependent
FEMP Standby Power
Compliant
Yes, with Wake-on-LAN disabled: <2W in S5- Power Off
Power consumption in
sleep mode (as defined by
ENERGY STAR) - Suspend
to RAM (S3)
<4W
Built-in Self Test (BIST)
LED
Yes
Surge Tolerant Full
Ranging Power Supply
(withstands power surges
up to 2000V)
Yes
Hood Lock Header Yes
ErP Lot 6- Tier 1
Compliance @ 230V (<1W
in S5- Power Off)
Yes
ErP Lot 6- Tier 2
Compliance @ 230V
(<0.5W in S5- Power Off)
Yes
Declared Noise Emissions
(Entry-level and High-end
configurations)
System Configuration
Example Configuration #1 To be advised later with the Intel Core i3 processor introduction.
QuickSpecs
HP Z220 CMT Workstation
System Technical Specifications
DA - 14286 North America — Version 20 — November 21, 2013 Page 17