HP Z27 G2 Series - Page 15

13
Disassembly procedure
item
picture
Operation
Tool
Notes
1
1. Put Monitor on clean
cushion carefully
2. Unlock 4 screws
Screw-
driver
2
Disassembly the RC from
the monitor with tools,
notice the disassembly
order:
1. Use tools to pry open
the RC from the two
opening holes
2. Pry open the RC as
shown in the picture 5
3. Notice: The tool cannot
be pressed to the bezel
when pry the RC
4. Remove RC from
panel
1
2
3
4
5