HP Z43

EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 SCREW DRIVER(PHILLIPS HEAD)
#1
Description #2 SCREW DRIVER(PHILLIPS HEAD)
#2
Description #3 SCREW DRIVER(PHILLIPS HEAD)
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove cable from Display head
2. Remove Stand Base From Display Head
3. Remove Rear Cover From Display Head
4. Remove Back cover from display head
5. Remove Bracket Assy From Display Head
6. Remove Hinge From Display Head
7. Remove Hinge bracket from display head
8. Remove shielding cover from display head
9. Remove tap,rubber and LED driver BD
10. Remove Front Cover From Display Head
11. Disassemble Front Cover
12. Disassemble Bracket ASSY
13. Disassemble Stand ASSY
14. Disassemble Panel ASSY
15.
16.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).