HPE SFP28 User Manual

7
25-Gigabit Ethernet transceiver modules
compatibility matrix
25-Gigabit Ethernet transceiver modules
Before you install, configure, or upgrade a device with HPE 25-Gigabit Ethernet transceiver
modules, always see the device's release notes for latest information. This compatibility matrix does
not replace or supersede the release notes.
Table 7 25 Gigabit Ethernet transceiver modules
Product code
Transceiver module
Description
SFP28
JL293A
HPE X190 25G SFP28 LC SR
100m MM Transceiver
LSWM2SFP28,25G SFP28 Optical Transceiver
Module,(850nm,100m,SR,LC)
JL294A
HPE X240 25G SFP28 to SFP28
1m Direct Attach Copper Cable
LSWM2SFP28A,25G SFP28 to SFP28 1m Passive
Cable,1m
JL295A
HPE X240 25G SFP28 to SFP28
3m Direct Attach Copper Cable
LSWM2SFP28B,25G SFP28 to SFP28 3m Passive
Cable,3m
JL296A
HPE X240 25G SFP28 to SFP28
5m Direct Attach Copper Cable
LSWM2SFP28C,25G SFP28 to SFP28 5m Passive
Cable,5m
JH955A
HPE X2A0 25G SFP28 to SFP28
3m Active Optical Cable
LSWM2SFP28D,25G SFP28 to 25G SFP28
AOC,3m
JH956A
HPE X2A0 25G SFP28 to SFP28
5m Active Optical Cable
LSWM2SFP28E,25G SFP28 to 25G SFP28
AOC,5m
JL297A
HPE X2A0 25G SFP28 to SFP28
7m Active Optical Cable
LSWM2SFP28F,25G SFP28 to 25G SFP28
AOC,7m
JL298A
HPE X2A0 25G SFP28 to SFP28
10m Active Optical Cable
LSWM2SFP28G,25G SFP28 to 25G SFP28
AOC,10m
JL299A
HPE X2A0 25G SFP28 to SFP28
20m Active Optical Cable
LSWM2SFP28H,25G SFP28 to 25G SFP28
AOC,20m
Switching minimum software release
requirements
HPE FlexFabric 5950 switch series minimum software
version requirements
Switch or module Transceiver module (Product code)
Minimum software
release
DDM
support
Release
version
HPE FlexFabric 5950
HPE X190 25G SFP28 LC SR 100m MM
Xcvr
YES R6123

HPE SFP28 Specifications

General

Form Factor	SFP28
Data Rate	25 Gbps
Connector Type	LC
Wavelength	850nm, 1310nm
Cable Type	Multimode Fiber, Single-mode Fiber
Max Distance	100 m (SR), 10 km (LR), 40 km (ER)
Operating Temperature	0°C to 70°C (32°F to 158°F)
Compatibility	HPE switches and routers with SFP28 ports