HPE Synergy 660 Gen10 User Manual

HPE Synergy 660 Gen10 Compute Module
Maintenance and Service Guide
Part Number: 876829-006
Published: June 2019
Edition: 6
Abstract
This document is for the person who installs, administers, and troubleshoots compute modules
and storage systems. Hewlett Packard Enterprise assumes you are qualified in the servicing of
computer equipment and trained in recognizing hazards in products with hazardous energy levels.

HPE Synergy 660 Gen10 Specifications

General

Processor	Intel Xeon Scalable processors
Network	FlexibleLOM
Form Factor	Compute Module
Power Supply	HPE Synergy Power Modules (shared within the frame)
Operating System Support	Microsoft Windows Server
Memory	Up to 6 TB (24 x 256 GB DDR4 DIMMs at 2933 MT/s)

Summary

Illustrated Parts Catalog

Drive Spare Parts

Customer Self Repair

CSR Part Categories

Explains mandatory vs. optional parts for customer replacement.

Removal and Replacement Procedures

Safety Considerations

General safety guidelines, ESD prevention, warnings, and cautions.

Compute Module Preparation

Steps for powering down and preparing the compute module for service.

Removing and Replacing DIMMs

Step-by-step guide for installing and removing memory modules.

Removing and Replacing the System Board

Detailed steps for replacing the main system board.

Documentation and Troubleshooting Resources

HPE Synergy Troubleshooting Resources

Information on guides and tools for diagnosing and resolving issues.

Component Identification

System Board Components

Support and Other Resources

Accessing Hewlett Packard Enterprise Support