8. Install the new HPE Persistent Memory module, and review the persistent memory configuration of the
compute module.
For more information, see Configuring the compute module for HPE Persistent Memory on page 48.
9. If you are relocating the HPE Persistent Memory module to or from another compute module, see the HPE
Persistent Memory module relocation guidelines on page 48.
HPE Persistent Memory module-processor compatibility
HPE Persistent Memory modules are supported only in compute modules with second-generation Intel Xeon
Scalable processors installed.
Configuring the compute module for HPE Persistent Memory
After installing HPE Persistent Memory modules, configure the compute module for HPE Persistent Memory.
IMPORTANT: Always follow recommendations from your software application provider for high-
availability best practices to ensure maximum uptime and data protection.
A number of configuration tools are available, including:
• UEFI System Utilities—Access System Utilities through the Remote Console to configure the compute
module by pressing the F9 key during POST.
• iLO RESTful API—Use the iLO RESTful API through tools such as the RESTful Interface Tool (ilorest) or
other third-party tools.
• HPE Persistent Memory Management Utility—The HPE Persistent Memory Management Utility is a
desktop application used to configure the compute module for HPE Persistent Memory, as well as
evaluate and monitor the compute module memory configuration layout.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/persistentmemory-docs).
HPE Persistent Memory module relocation guidelines
Observe the relocation guidelines when doing the following:
48 Removal and replacement procedures
To Next Page
Loading...
