Item Description Status
3 Mezzanine NIC status LED
Solid green= Link on any
Mezzanine NIC
Flashing green= Activity on any
Mezzanine NIC
Off = No link or activity on any
Mezzanine NIC
4 Power On/Standby button and
system power LED
Solid green = System on
Flashing green (1 Hz/cycle per
sec) = Performing power on
sequence
Solid amber = System in standby
Off = No power present
1
1
If all other LEDs are off, then no power is present to the compute module. (For example, facility power is not present,
power cord is not attached, no power supplies are installed, power supply failure has occurred, or the compute module is
not properly seated.) If the health LED is flashing green while the system power LED is off, the Power On/Standby button
service is initializing or that an iLO reboot is in progress.
Front panel components
Item Description
1 Drive Box 1, Drive bay 1
1
2 Drive Box 1, Drive bay 2
1
3 Drive Box 2, Drive bay 1
1
4 Drive Box 2, Drive bay 2
1
Table Continued
Component identification 71
To Next Page
Loading...
