HPI Racing Nitro RS4 User Manual

List of tools provided within the kit for assembly.

Tools that must be purchased separately for assembly.

Essential equipment needed to operate the R/C car.

Guidelines for choosing safe places to operate your R/C model.

Warnings about handling flammable glow fuel and fire hazards.

Procedures for safe operation and handling hot/rotating parts.

Step-by-step guide to assembling the differential.

How to clean and maintain the air filter.

How to turn on the transmitter and receiver correctly.

Installing and adjusting throttle and steering servos.

Importance of air circulation for nitro engines and cutting windows for cooling.

Using turnbuckles for alignment adjustments.

Changing steering knuckles for different handling characteristics.

Adjusting throttle trim for a 1mm carb opening at neutral.

Ensuring the carburetor opens fully when the throttle trigger is pulled.

Adjusting the linkage so the brake engages correctly.

Powering up the radio system and safely fueling the car.

Priming the carb and the steps to start the nitro engine.

Addressing engine flooding and safe methods to stop the engine.

How to perform static break-in to prevent engine damage.

Adjusting needle valve and idle screw for performance.

Diagnosing and fixing problems when the engine won't start.

Addressing issues where the engine stalls or reacts poorly.

Troubleshooting difficulties in controlling the car and clutch issues.