LE07297AAA
General Information
• This product must be installed and used as per these instructions.
• This product must be installed by a licensed electrician.
• Do not megger this product.
• This product must only be used with the loads specified. Other load types should only be used when written confirmation is given by HPM Legrand.
• An IP rating of IP56 is generally considered suitable for fully exposed external installations and for areas subject to hose down.
• The IP rating of this product is only valid when all applicable seals, glands and their appropriate cables are installed correctly. Silicone sealant or PVC
cement should be used where necessary. Flush caps must be used to cover mounting screws.
• The IP rating of this product is only valid when installed on flat and non-porous surfaces. Additional sealing may be required for irregular surfaces.
• Severe electromagnetic interference from other products may cause malfunction of this product.
• This product should only be cleaned with a damp cloth. Cleaning agents and solvents should not be used.
• This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should be discarded.
• HPM Legrand reserves the right to modify the specifications of this product at any time.
Warranty
HPM Legrand will honour all statutory guarantees that you as
a consumer are entitled to rely upon under the Australian and
New Zealand Consumer Law against a manufacturer including a
guarantee that any products HPM Legrand has manufactured or
imported are of acceptable quality.
To make a claim under any statutory guarantee (or other warranty)
you should first contact the supplier, contractor or retailer from
whom you purchased the products.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
HPM Legrand Australia
1300 369 777
www.hpm.com.au
HPM Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661