HPRT HD100 Quick Start Guide

Loading the Roll
1.Press the le and right cover open lever
with hands simultaneously and li the
printer cover.
2.Pull the roll holders open and place the roll
between them.
3.Make sure the roll paper close to paper
roll holders and press down the locking tab.
4.Pass the labels through label guides and adjust
label guides to label’s width.
6.Press down the cover unl it closes.
Connecng the Power
5.Press the lock and close the cover slightly.
1.Make sure the printer’s power switch is “OFF”.
2.Connect the AC adapter to power receptacle.
3.Connect the power cord to AC adapter.
4.Connect the other end of power cord to the outlet.
！
Note: Please refer to windows driver installaon in HD100 and HD130 User Manual.
Rev.1.0 -3-
-4-
Varies by regions
Power Cord
AC Adapter
OFF ON
1
2
3
4

HPRT HD100 Specifications

General

Brand	HPRT
Model	HD100
Category	Printer
Language	English