To Next Page
S
Stephanie HardyAug 4, 2025
What to do if Error LED blinks and beeper alarms on HPRT TP80K?
- BBradley LoweAug 4, 2025
If the Error LED is blinking and the beeper is alarming on your HPRT Printer, it could be due to several reasons. The thermal print head might be overheated; in this case, turn the printer off and resume printing when it cools down. It could also be due to over-voltage or low-voltage, so ensure you print with the specified voltage. Finally, it's possible there's a cutter jam; try restarting the printer.
General
