Need help?Do you have a question about the HQ Power VDP575MHS20FL and is the answer not in the manual?
Procedure for fitting or replacing the unit's lamp, including safety precautions.
How to adjust the lamp holder position to achieve maximum light output.
Configuring the lens system to set the desired beam angle between 8° and 22°.
Step-by-step guide for opening the compartment and replacing gobos.
Guidelines for safe and proper installation, including weight support and safety cables.
Instructions on how to safely replace a blown fuse with one of the same type.
Table detailing DMX channel functions, ranges, and descriptions for control.
Mapping of DMX channels to specific functions when using 8-bit protocol.
Guidance on connecting the device to a DMX controller using XLR cables.
Recommendation for using DMX terminators to prevent signal corruption.
Explanation of DMX XLR connector pinouts and DMX wiring configurations.
How to set the digital start address for DMX control of the device.
Navigating and using the device's control panel for settings and adjustments.
Description of key functions accessible via the control panel menu.
Details on functions controllable via DMX, including lamp, colours, and gobos.
General| Brand | HQ Power |
|---|---|
| Model | VDP575MHS20FL |
| Category | Flood Light |
| Language | English |
To Next Page
